BNMDT - DRY POWDERED TONER
- MSDS: BNMDT
- Manufacturer: FUTURE GRAPHICS
- Product Name: DRY POWDERED TONER
- National Stock Number: 6850-00N027813
Product Identification
Product ID:DRY POWDERED TONER
MSDS Date:06/18/1990
FSC:6850
NIIN:00N027813
MSDS Number: BNMDT
Responsible Party
CHATSWORTH, CA 91311
US
Emergency Phone: 818-341-6314
Info Phone: 818-341-6314
Cage: FGRAP
Contractor
Telephone: 800-394-9900
Cage: FGRAP
Ingredients
STYRENE ACRYLATE COPOLYMER
CAS: 25158-46-2
Fraction By Weight: 40-50%
IRON(III) OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 25-45%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <10%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:RESPIRATORY IRRITATION IN PROLONGED EXPOSURE TO
EXCESSIVE DUST.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS CAN BE
AGGRAVATED BY EXCESSIVE EXPOSURE.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. INHAL: REMOVE FROM
EXPOSURE. INGEST: DRINK SEVERAL GLASSES OF WATER. SKIN: WASH WITH
MILD SOAP AND WATER.
Fire Fighting
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID BREATHING SMOKE.
Unusual Fire/Explosion Hazard:EXCESS DUST IN AIR CAN FORM EXPLOSIVE
MIXTURE. COMBUSTIBLE.
Accidental Release
Spill Release Procedures:COLLECT SPILL WITH VACUUM OR BROOM. AVOID
CREATING EXCESS DUST-USE NIOSH/MSHA APPROVED DUST MASK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. AVOID BREATHING EXCESS DUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED NUISANCE DUST MASK.
Ventilation:LOCAL EXHAUST: VENTILATE WORK AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:AVOID PROLONGED BREATHING OF DUST.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:248F,120C
Spec Gravity:1.5-1.7
Solubility in Water:NOT SOLUBLE
Appearance and Odor:FINE BLACK POWDER, RESIN ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, CARBON. PRODUCTS OF
COMBUSTION ARE TOXIC. AVOID SMOKE INHALATION.
Disposal
Waste Disposal Methods:DO NOT INCINERATE. FOLLOW FEDERAL, STATE, AND
LOCAL REGULATIONS CONCERNING FILM NUISANCE DUST CONTAINMENT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.